Aerial Figure 8 DJDA Fiber Optic Cable GYTC8S53
Stranded Figure 8 Aerial Cable, singlemode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together
Showing 1–36 of 41 results
-
-
ANTI-RODENT All DIELECTRIC SELF-SUPPORTING ADSS AERIAL CABLE
SPECIFICATION 1.Introduction of fiber optical cable ADSS cable possesses high tensile strength and flexibility in compact cable sizes. At the same time, it provides excellent optical transmission and physical performance. FRP as central strength member to provide the tensile strength .A full circle of flat FRP rod is laid between out and inner jackets ,which has…
-
ANTI-RODENT FRP ARMOREDDOUBLE JACKETSÂ AERIALADSS CABLE
1.Introduction of fiber optical cable ADSS cable possesses high tensile strength and flexibility in compact cable sizes. At the same time, it provides excellent optical transmission and physical performance. FRP as central strength member to provide the tensile strength , additionally aramid yarn also reinforce the tensile performance . A full circle of flat FRP rods…
-
-
-
-
-
-
-
-
-
-
-
-
-
-
GDVV 2G.657A2 (Bow-type) +2×1.5mm^2 Optical hybrid cable specification
1cross section 2 Cable structure and size Table 1 Cable structure and size Item Unit Value FTTH drop cable Fiber / G657.a2 red Strength member / Steel with glue Strength member size (steel wire/glue coating) mm 0.43/0.48 (±0.02) Drop cable size mm 2.1(±0.1)*1.6(±0.1) Drop cable sheath / LSZH Blue, yellow Power cable Conductor structure / 30/0.25±0.01mm Insulation Material / PVC （red,blue） Nominal thickness mm…
-
GYFTC8Y Self-supporting Aerial Figure 8 Optical Cable
The structure of GYFTC8Y optical cable is to sleeve the optical fiber into the PBT loose tube, and the loose tube is filled with waterproof compound
-
Hybrid fiber optical cable
Hybrid cable is a new type of fiber optic cable, which is used for transmission line in broadband access network system. It
-
Indoor Breakout Tight Buffer Optical Cable
A type of fiber optic cable containing several fibers, each with its own jacket and all of them surrounded by one common jacket
-
Indoor Distribution Tight Buffer Optical Cable
The distribution fiber optic cable is made by evenly applying strands of Aramid yarns or High strength glass yarns as the strength
-
Indoor Helical Armored Fiber Optical Cable
The Simplex fiber optic cable uses single 900µm tight buffered Tube structure as fiber optic transmission medium, covered
-
Indoor outdoor single jacket drop cable
　　This drop cable enabling FTTH rol-outs on facade or in duct over short distances (up to 50 meters). Built with a LSZH-FR sheath and with 2 FRP, this drop cable is compatible with a wide range of temperatures. 　　Fully compliant with the European Construction Products Regulation, the LM2BK can also be installed indoors. 　　This cable…
-
-
Indoor/outdoor double sheathed drop cable
　　The double sheathed drop cable range perfectly meets the needs of FTTH rollouts in low dense areas. LM4 drops are used for enabling connections between an outdoor optical drop point and an indoor access terminal at the subscriber’s premises. Its outer HDPE sheath is easy to remove offering thus an easy access to a fire…
-
-
-
Non-metallic fiber optic cable GYFTY
GYFTY (non-metallic strengthening member, loose tube stranded and filled, polyethylene sheathed outdoor optical fiber cable
-
-
-
-
SM MM Indoor Duplex Optical Cable Tight Buffer
Indoor fiber optic cables are used exclusively within buildings and must have a flame-retardant jacket to fit this purpose(LSZH)
-
SM/MM Indoor Simplex Optical Cable Tight Buffer
Indoor fiber optic cables are used exclusively within buildings and must have a flame-retardant jacket to fit this purpose(LSZH)
-
-
Stranded Loose Tube Light-armored cable GYFTS
The tubes are filled with a water-resistant filling compound. A FRP, sometimes sheathed with polyethylene (PE) for cable with high fiber count
-
